검색결과
-
[특집-기술위원회] TC 217 - 화장품(Cosmetics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 등이 있다.ISO/TC 217 화장품(Cosmetics)과 관련된 기술위원회는 TC 215, TC 216과 마찬가지로 1998년 결성됐다. 사무국은 이란 국가 표준기구(Iran National Standards Organization, INSO)에서 맡고 있다.위원회는 엘햄 가세미(Mrs Elham Ghasemi)가 책임지고 있다. 현재 의장은 울리 오스터발더(Mr Uli Osterwalder)이며 임기는 2025년 말까지다. ISO 기술 프로그램 관리자는 웬얀 리(Ms Wenyan Li), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등이다.범위는 화장품 제품 분야의 표준화다. 현재 ISO/TC 217 사무국의 직접적인 책임 하에 발행된 표준은 49개며 ISO/TC 217 사무국의 직접적인 책임 하에 개발 중인 표준은 3개다. 참여하고 있는 회원은 43개국, 참관 회원은 30개국이다.□ ISO/TC 217 사무국의 직접적인 책임 하에 발행된 표준 49개 중 15개 목록▷ISO 4973:2023 Cosmetics — Microbiology — Quality control of culture media and diluents used in cosmetics standards▷ISO 10130:2009 Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization▷ISO 11930:2019 Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product▷ISO 11930:2019/Amd 1:2022 Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product — Amendment 1▷ISO 12787:2011 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques▷ISO/TR 14735:2013 Cosmetics — Analytical methods — Nitrosamines: Technical guidance document for minimizing and determining N-nitrosamines in cosmetics▷ISO 15819:2014 Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS▷ISO 16128-1:2016 Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products — Part 1: Definitions for ingredients▷ISO 16128-2:2017 Cosmetics — Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients — Part 2: Criteria for ingredients and products▷ISO 16128-2:2017/Amd 1:2022 Cosmetics — Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients — Part 2: Criteria for ingredients and products — Amendment 1▷ISO 16212:2017 Cosmetics — Microbiology — Enumeration of yeast and mould▷ISO 16212:2017/Amd 1:2022 Cosmetics — Microbiology — Enumeration of yeast and mould — Amendment 1▷ISO 16217:2020 Cosmetics — Sun protection test methods — Water immersion procedure for determining water resistance▷ISO/TR 17276:2014 Cosmetics — Analytical approach for screening and quantification methods for heavy metals in cosmetics▷ISO 17516:2014 Cosmetics — Microbiology — Microbiological limits□ ISO/TC 217 사무국의 직접적인 책임 하에 개발 중인 표준 3개 목록▷ISO/AWI 22176 Cosmetics — Analytical methods — Development of a global approach for validation of quantitative analytical methods▷ISO/DIS 23675 Cosmetics — Sun protection test methods — In Vitro determination of Sun Protection Factor (SPF)▷ISO/DIS 23698 Cosmetics — Measurement of the sunscreen efficacy by diffuse reflectance spectroscopy
-
[특집-기술위원회] TC 216 - 신발류(Footwear)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~107 △1963년 TC 108~111 △1964년 TC 112~115, TC 117 △1965년 TC 118 △1966년 TC 119~122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146~150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~161 △1975년 TC 162~164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171~174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~186 △1984년 TC 188 △1985년 TC 189~191 △1988년 TC 192~194 △1989년 TC 195 △1990년 TC 197, TC 198 △1991년 TC 199, TC 201, TC 202 △1992년 TC 204~206 △1993년 TC 209 △1994년 TC 210, TC 211 △1996년 TC 213, TC 214 등이 있다.ISO/TC 216 신발류(Footwear)와 관련된 기술위원회는 TC 215와 마찬가지로 1998년 결성됐다. 사무국은 스페인 표준화협회(Spanish Association for Standardization, UNE)에서 맡고 있다.위원회는 헤나르 아라구조 리베라(Ms Henar Araguzo Rivera)가 책임지고 있다. 현재 의장은 카르멘 아리아스 카스텔라노(Ms Carmen ARIAS CASTELLANO)이며 임기는 2024년 말까지다. ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 발레리아 아가넨노네(Ms Valeria Agamennone) 등이다.범위는 신발 구성품에 대한 테스트 방법, 용어, 성능 요구사항의 표준화다. 또한 신발 전체에 대한 데트스 방법, 용어의 표준화도 포함된다.단, 전문가용 신발(이미 ISO/TC 94에 포함됨) 및 부츠와 신발에 대한 크기 지정 시스템 지정 및 표시(ISO/TC 137에서 다룸) 등은 제외한다.현재 ISO/TC 216 사무국의 직접적인 책임 하에 발행된 표준은 81개며 ISO/TC 216 사무국의 직접적인 책임 하에 개발 중인 표준은 15개다. 참여하고 있는 회원은 21개국, 참관 회원은 27개국이다.□ ISO/TC 216 사무국의 직접적인 책임 하에 발행된 표준 81개 중 15개 목록▷ISO 10717:2010 Footwear — Test method for slide fasteners — Burst strength▷ISO 10734:2016 Footwear — Test method for slide fasteners — Strength of slide fastener pullers▷ISO 10748:2011 Footwear — Test method for slide fasteners — Slider locking strength▷ISO 10750:2015 Footwear — Test method for slide fasteners — Attachment strength of end stops▷ISO 10751:2016 Footwear — Test methods for slide fasteners — Resistance to repeated opening and closing▷ISO 10764:2016 Footwear — Test methods for slide fasteners — Lateral strength▷ISO 10765:2010 Footwear — Test method for the characterization of elastic materials — Tensile performance▷ISO 10768:2010 Footwear — Test method for the determination of the resistance of elastic materials for footwear to repeated extension — Fatigue resistance▷ISO 16177:2012 Footwear — Resistance to crack initiation and growth — Belt flex method▷ISO/TR 16178:2021 Footwear — Critical substances potentially present in footwear and footwear components — Lists of critical chemical substances▷ISO/TS 16179:2012 Footwear — Critical substances potentially present in footwear and footwear components — Determination of organotin compounds in footwear materials▷ISO 16181-1:2021 Footwear — Critical substances potentially present in footwear and footwear components — Part 1: Determination of phthalate with solvent extraction▷ISO 16181-2:2021 Footwear — Critical substances potentially present in footwear and footwear components — Part 2: Determination of phthalate without solvent extraction▷ISO 16186:2021 Footwear — Critical substances potentially present in footwear and footwear components — Determination of dimethyl fumarate (DMFU)▷ISO 16187:2013 Footwear and footwear components — Test method to assess antibacterial activity□ ISO/TC 216 사무국의 직접적인 책임 하에 개발 중인 표준 15개 목록▷ISO/DIS 16179 Footwear — Critical substances potentially present in footwear and footwear components — Determination of organotin compounds in footwear materials▷ISO/DIS 16187 Footwear and footwear components — Test method to assess antibacterial activity▷ISO/DIS 19952 Footwear — Vocabulary▷ISO/DTS 20358 Footwear — Performance requirements for components for footwear — Accessories▷ISO/DIS 20537.2 Footwear — Identification of defects during visual inspection — Vocabulary▷ISO/CD 20681 Footwear and footwear components — Test method to assess antimicrobial activity — Agar diffusion test▷ISO/DIS 20686 Footwear — Critical substances potentially present in footwear and footwear components — Determination of certain organic solvents▷ISO/DTS 20939 Footwear — Performance requirements for components for footwear — Outsoles▷ISO/DTS 20952 Footwear — Performance requirements for components for footwear — Uppers▷ISO/DTS 20953 Footwear — Performance requirements for components for footwear — Lining and insocks▷ISO/DTS 20955 Footwear — Performance requirements for components for footwear — Insoles▷ISO/DTS 20961 Footwear — Performance requirements for components for footwear — Shanks▷ISO/DTS 20995 Footwear — Performance requirements for components for footwear — Stiffeners and toe puffs▷ISO/WD 23377 Footwear — Critical substances potentially present in footwear and footwear components — Test method to quantitatively determine certain bisphenols in footwear materials▷ISO/CD TS 23889 Footwear-Performance requirements for components for footwear-Heels and top pieces
-
[특집-기술위원회] TC 190 - 토양 품질(Soil quality)… 준설된 수중 토양 물질(굴착된 퇴적물)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 △1983년 TC 183~TC 186, △1984년 TC 188등이 있다.ISO/TC 190 토양 품질(Soil quality)과 관련된 기술위원회는 TC 189와 마찬가지로 1985년 결성됐다. 사무국은 독일 표준화기구(Deutsches Institut für Normung e.V., DIN)에서 맡고 있다.위원회는 테레사 게스바인(Mrs Theresa Geßwein)이 책임지고 있다. 현재 의장은 냇 클라우스 리파르트(Mr Dr. rer. nat Klaus Liphard)이다.ISO 기술 프로그램 관리자는 이사벨 베가(Ms Isabelle Vega), ISO 편집 관리자는 발레리아 아가멤논(Ms Valeria Agamennone)등으로 조사됐다.범위는 토양 품질 분야의 표준화다. 원지 토양(원래의 토양), 준설된 수중 토양 물질(굴착된 퇴적물)을 포함해 토양 내 또는 토양 위에서 재사용하기 위한 토양 물질 등도 포함된다.단 토양 품질 평가를 위한 임계값 또는 한계값이나 ISO/TC 182 지질공학에서 다루고 있는 토목공학적 측면이나 ISO/TC 147 수질에서 다루고 있는 현장 퇴적물 등은 제외한다.현재 ISO/TC 190 사무국과 관련해 발행된 표준은 198개며 ISO/TC 190 사무국의 직접적인 책임 하에 발행된 표준은 16개다.ISO/TC 190 사무국과 관련해 개발된 표준은 16개며 ISO/TC 190 사무국의 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 31개국, 참관 회원은 30개국이다.□ ISO/TC 190 사무국의 직접적인 책임 하에 발행된 표준 16개 목록▷ISO 4974:2023 Soil quality — Guidance on soil temperature measurement▷ISO 11074:2015 Soil quality — Vocabulary▷ISO 11074:2015/Amd 1:2020 Soil quality — Vocabulary — Amendment 1▷ISO 11275:2004 Soil quality — Determination of unsaturated hydraulic conductivity and water-retention characteristic — Wind's evaporation method▷ISO 15709:2002 Soil quality — Soil water and the unsaturated zone — Definitions, symbols and theory▷ISO 15903:2002 Soil quality — Format for recording soil and site information▷ISO 16586:2003 Soil quality — Determination of soil water content as a volume fraction on the basis of known dry bulk density — Gravimetric method▷ISO 16586:2003/Cor 1:2009 Soil quality — Determination of soil water content as a volume fraction on the basis of known dry bulk density — Gravimetric method — Technical Corrigendum 1▷ISO 17312:2005 Soil quality — Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter▷ISO 17313:2004 Soil quality — Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter▷ISO 20951:2019 Soil Quality — Guidance on methods for measuring greenhouse gases (CO2, N2O, CH4) and ammonia (NH3) fluxes between soils and the atmosphere▷ISO 23400:2021 Guidelines for the determination of organic carbon and nitrogen stocks and their variations in mineral soils at field scale▷ISO 23992:2022 Soil quality — Framework for detailed recording and monitoring of changes in dynamic soil properties▷ISO 25177:2019 Soil quality — Field soil description▷ISO 28258:2013 Soil quality — Digital exchange of soil-related data▷ISO 28258:2013/Amd 1:2019 Soil quality — Digital exchange of soil-related data — Amendment 1□ ISO/TC 190 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/DIS 11074 Soil quality — Vocabulary▷ISO/CD 18718 Assessment of soil functions and related-ecosystem services: definitions and conceptual Framework▷ISO/CD 18721 Assessment of ecological soil functions: indicators and methods▷ISO/AWI 21251 Guidance for estimating organic carbon stocks in soils according to their biogeochemical stability or or residence time□ ISO/TC 190 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 190/SC 3 Chemical and physical characterization ; 발행된 표준 87개, 개발 중인 표준 13개▷ISO/TC 190/SC 4 Biological characterization ; 발행된 표준 56개, 개발 중인 표준 9개▷ISO/TC 190/SC 7 Impact assessment ; 발행된 표준 39개, 개발 중인 표준 4개
-
[특집-기술위원회] TC 183 - 구리, 납, 아연, 니켈 광석 및 정광(Copper, lead, zinc and nickel ores and concentrates)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.또한 △1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 등도 포함된다.그리고 △1976년 TC 165, TC 166 △1977년 TC 167, TC 168, TC 170 △1978년 TC 171, TC 172, TC 173, TC 174 △1979년 TC 176, TC 178 △1980년 TC 180, TC 181 △1981년 TC 182 등이 있다.ISO/TC 183 구리, 납, 아연, 니켈 광석 및 정광(Copper, lead, zinc and nickel ores and concentrates)과 관련된 기술위원회는 1983년 결성됐다. 사무국은 오스트레일리아 표준협회(Standards Australia, SA)에서 맡고 있다.위원회는 재스민 브린스미드(Ms Jasmine Brinsmead)가 책임지고 있으며 현재 의장은 마크 오드와이어(Mr Mark O'Dwyer)이며 임기는 2026년까지다. ISO 기술 프로그램 관리자는 스테판 소바쥬(M Stéphane Sauvage), ISO 편집 관리자는 니콜라 페루(Ms Nicola Perou) 등으로 조사됐다.범위는 샘플링, 화학적 분석 및 물리적 테스트를 포함해 구리, 납, 아연, 니켈 광석 및 정광(농축물), 제련소 잔류물 분야의 표준화다.현재 ISO/TC 183 사무국의 직접적인 책임 하에 발행된 표준은 28개며 ISO/TC 183 사무국의 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 8개국, 참관 회원은 26개국이다.□ ISO/TC 183 사무국의 직접적인 책임 하에 발행된 표준 28개 중 15개 목록▷ISO 3483:2023 Copper and zinc sulfide concentrates — Determination of thallium — Acid digestion and inductively coupled plasma-mass spectrometry▷ISO 9599:2015 Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method▷ISO 10251:2006 Copper, lead, zinc and nickel concentrates — Determination of mass loss of bulk material on drying▷ISO 10258:2018 Copper sulfide concentrates — Determination of copper content — Titrimetric methods▷ISO 10378:2016 Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method▷ISO 10469:2006 Copper sulfide concentrates — Determination of copper — Electrogravimetric method▷ISO 11441:1995 Lead sulfide concentrates — Determination of lead content — Back titration of EDTA after precipitation of lead sulfate▷ISO 11790:2017 Copper, lead, zinc and nickel concentrates — Guidelines for the inspection of mechanical sampling systems▷ISO 11794:2017 Copper, lead, zinc and nickel concentrates — Sampling of slurries▷ISO 12739:2006 Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method▷ISO 12740:1998 Lead sulfide concentrates — Determination of silver and gold contents — Fire assay and flame atomic absorption spectrometric method using scorification or cupellation▷ISO 12742:2020 Copper, lead and zinc sulfide concentrates — Determination of transportable moisture limits — Flow-table method▷ISO 12743:2021 Copper, lead, zinc and nickel concentrates — Sampling procedures for determination of metal and moisture content▷ISO 12744:2006 Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling▷ISO 12745:2008 Copper, lead and zinc ores and concentrates — Precision and bias of mass measurement techniques□ ISO/TC 183 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/CD 11456 Copper and zinc sulfide concentrates — Determination of silver content — Acid digestion and flame atomic absorption or inductively coupled plasma emission spectrometric method▷ISO/AWI 12739 Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method▷ISO/CD 12744 Copper, lead, zinc and nickel concentrates — Experimental methods for checking the precision of sampling▷ISO/CD 13548 Copper, lead and zinc sulfide concentrates — Determination of fluorine content by sodium hydroxide fusion and fluoride ion selective electrode detection
-
[특집-기술위원회] TC 167 - 강철 및 알루미늄 구조물(Steel and aluminium structures)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 △1975년 TC 162~TC 164 △1976년 TC 165, TC 166 등도 포함된다.ISO/TC 167 강철 및 알루미늄 구조물(Steel and aluminium structures)과 관련된 기술위원회는 1977년 결성됐다. 사무국은 노르웨이 포준화국(Standards Norway, SN)에서 맡고 있다.위원회는 로알드 세그로프(Mr Roald Sægrov)가 책임지고 있으며 현재 의장은 비욘 우펠트(Mr Björn Uppfeldt)이며 임기는 2026년까지다. ISO 기술 프로그램 관리자는 안나 카테리나 로시(Dr Anna Caterina Rossi), ISO 편집 관리자는 클라우디아 루에제(Ms Claudia Lueje) 등으로 조사됐다.범위는 건축, 토목공항, 관련 구조물에 적용되는 것과 같은 강철 및 알루미늄 함금의 구조적 사용 분야의 표준화다.표준은 재료, 구조 구성 요소 및 연결부와 함께 강철 및 알루미늄 구조물의 설계, 제작 및 설치에 관한 요구 사항으로 구성된다.현재 ISO/TC 167 사무국의 직접적인 책임 하에 발행된 표준은 7개며 ISO/TC 167 사무국의 직접적인 책임 하에 개발 중인 표준은 4개다. 참여하고 있는 회원은 20개국, 참관 회원은 32개국이다.□ ISO/TC 167 사무국의 직접적인 책임 하에 발행된 표준 7개 목록▷ISO 10721-1:1997 Steel structures — Part 1: Materials and design▷ISO 17607-1:2023 Steel structures — Execution of structural steelwork — Part 1: General requirements and terms and definitions▷ISO 17607-2:2023 Steel structures — Execution of structural steelwork — Part 2: Steels▷ISO 17607-3:2023 Steel structures — Execution of structural steelwork — Part 3: Fabrication▷ISO 17607-4:2023 Steel structures — Execution of structural steelwork — Part 4: Erection▷ISO 17607-5:2023 Steel structures — Execution of structural steelwork — Part 5: Welding▷ISO 17607-6:2023 Steel structures — Execution of structural steelwork — Part 6: Bolting□ ISO/TC 167 사무국의 직접적인 책임 하에 개발 중인 표준 4개 목록▷ISO/CD 18900 Steel structures — Structural bolting — Test method for determining slip factor for faying surfaces▷ISO/CD 18953 Steel structures — Structural bolting — Test method to determine loss of pretension from faying surface coatings▷ISO/CD 18954 Steel structures — Structural Bolting — Test method to establish bolt tightening procedures▷ISO/WD 20895 Welded joints performance for seismic steel structures
-
[기획-디지털 ID 기술] (108)장쑤서공공정기계연구소(江苏徐工工程机械研究院有限公司), '클라우드 서비스에 기초한 멀티-광산 사용자 온라인 관리 방법 및 시스템' 명칭의 중국 특허 등록 (CN 11중국 장쑤서공공정기계연구소(江苏徐工工程机械研究院有限公司)에 따르면 2023년 11월7일 '클라우드 서비스에 기초한 멀티-광산 사용자 온라인 관리 방법 및 시스템(Multi-mine user online management method and system based on cloud service)' 명칭의 중국 특허(CN 114884982)가 등록됐다.본 중국 등록 특허(CN 114884982)는 2022년 3월28일 출원된(CN 2022-10310104) 후 중국 특허청에 의해 심사를 받았다.본 중국 등록 특허(CN 114884982)는 광산 클라우드 서비스 플랫폼, 광산 클라이언트 시스템, 및 장비 클라이언트 시스템을 포함한다.본 중국 등록 특허(CN 114884982)는 멀티-광산 사용자를 위한 시스템 리소스 및 동작을 효율적으로 관리하고 배치 비용을 감소시켜 리소스 활용을 개선하기 위해 제안됐다.본 중국 등록 특허(CN 114884982)의 일 실시예에 따르면 광산 클라우드 서비스 플랫폼은 광산 사용자 리소스, 디지털 아이디 카드, 및 서비스 호출을 관리한다.광산 클라이언트 시스템은 로컬 디지털 아이디 카드 관리 및 리소스 관리를 처리한다. 장비 클라이언트 시스템은 생산 작업 동안 아이디 확인을 위해 장비 정보를 광산 클라이언트 시스템에 동기화한다.각 광산의 클라이언트 시스템이 실행되면 클라이언트 시스템이 속한 리소스 사본이 디지털 아이디 카드에 따라 로컬 광산에 로드되어 로컬 시스템과 장비측에서 사용된다.광산 사용자의 디지털 아이디 카드에 따라 리소스 매핑이 생성되고, 리소스 복사본이 로컬 광산에 로드된다. 광산 사용자 장비가 광산 클라이언트 시스템과 직접 상호 작용하고, 광산 클라이언트가 클라우드 서비스와 상호 작용하며, 완전한 데이터 함수 프로세스가 형성된다.이를 통해 본 중국 등록 특허(CN 114884982)는 멀티-광산 사용자의 시스템 자원 및 시스템 운영을 효과적으로 관리할 수 있다. 또한 멀티-광산 자원을 효율적으로 활용하고 광산의 로컬 배치 운영 비용을 효과적으로 절감할 수 있다.
-
[특집-기술위원회] TC 164 - 금속의 기계적 테스트(Mechanical testing of metals)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 △1974년 TC 156~TC 161 등도 포함된다.ISO/TC 164 금속의 기계적 테스트(Mechanical testing of metals)와 관련된 기술위원회는 TC 162, TC 163과 마찬가지로 1975년 결성됐다. 사무국은 일본산업표준조사회(日本産業標準調査会, Japanese Industrial Standards Committee, JISC)에서 맡고 있다.위원회는 히토시 요시다(Mr Hitoshi Yoshida)가 책임지고 있으며 현재 의장은 마사아키 타부치(Dr Masaaki Tabuchi)이며 임기는 2026년까지다. ISO 기술 프로그램 관리자는 메르세 페레 에르난데스(Mme Mercè Ferrés Hernández), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 금속 재료의 특성을 결정하는 데 사용되는 장비의 검증 및 교정을 포함해 기계적 테스트 방법의 표준화다. 단, 방법의 적용 및 얻은 결과에 대한 책임은 제외한다. 단 제품위원회가 특정 재료에 적합한 테스트를 개발하는 것을 배제하지 않는다.현재 ISO/TC 164 사무국과 관련해 발행된 표준은 95개며 이중 사무국의 직접적인 책임 하에 발행된 표준은 1개다. ISO/TC 164 사무국과 관련해 개발 중인 표준은 32개며 사무국의 직접적인 책임하에 개발 중인 표준은 2개다. 참여하고 있는 회원은 22개국, 참관 회원은 29개국이다.□ ISO/TC 164 사무국의 직접적인 책임 하에 발행된 표준 1개 목록▷ISO 23718:2007 Metallic materials — Mechanical testing — Vocabulary□ ISO/TC 164 사무국의 직접적인 책임 하에 개발중인 표준 2개 목록▷ISO/AWI TR 8463 Strategy for a Common Frame Work to Determine Measurement Uncertainty in Mechanical Testing▷ISO/WD TS 23718 Metallic materials — Mechanical testing — Vocabulary□ ISO/TC 163 사무국 분과위원회(Subcommittee)의 책임 하에 발행 및 개발 중인 표준 현황▷ISO/TC 164/SC 1 Uniaxial testing ; 발행된 표준 13개, 개발 중인 표준 8개▷ISO/TC 164/SC 2 Ductility testing ; 발행된 표준 28개, 개발 중인 표준 2개▷ISO/TC 164/SC 3 Hardness testing ; 발행된 표준 26개, 개발 중인 표준 7개▷ISO/TC 164/SC 4 Fatigue, fracture and toughness testing ; 발행된 표준 27개, 개발 중인 표준 13개
-
[특집-기술위원회] TC 157 - 비체계적 피임약 및 성병(STI) 예방 콘돔(Non-systemic contraceptives and STI barrier prophylactics)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다.기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 △1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104 등이다.△1962년 TC 105~TC 107 △1963년 TC 108~TC 111 △1964년 TC 112~TC 115, TC 117 △1965년 TC 118 △1966년 TC 119~TC 122 △1967년 TC 123 △1968년 TC 126, TC 127 △1969년 TC 130~136 △1970년 TC 137, TC 138, TC 142, TC 145 △1971년 TC 146, TC 147, TC 148, TC 149, TC 150, TC 153 △1972년 TC 154 △1973년 TC 155 등도 포함된다.ISO/TC 157 비체계적 피임약 및 성병(STI) 예방 콘돔(Non-systemic contraceptives and STI barrier prophylactics)과 관련된 기술위원회는 TC 156과 마찬가지로 1974년 결성됐다. 사무국은 말레이시아 표준부(Department of Standards Malaysia, DSM)에서 맡고 있다.위원회는 페리스 프레데릭(Mr Feris Frederick)이 책임지고 있다. 현재 의장은 파리다 하님 압 하난(Dr Faridah Hanim Ab Hanan)로 임기는 2026년까지다. ISO 기술 프로그램 관리자는 페트리샤 쿡(Mme Patricia Cook), ISO 편집 관리자는 마사 카산토산(Mrs Martha Casantosan) 등으로 조사됐다.범위는 비체계적 피임약 및 성병(sexually transmitted infections, STI)을 예방하기 위한 콘돔의 표준화다.현재 ISO/TC 157 사무국의 직접적인 책임 하에 발행된 표준은 18개며 ISO/TC 15 사무국의 직접적인 책임 하에 개발중인 표준은 2개다. 참여하고 있는 회원은 24개국, 참관 회원은 28개국이다.□ ISO/TC 157 사무국의 직접적인 책임 하에 발행된 표준 18개 목록▷ISO 4074:2015 Natural rubber latex male condoms — Requirements and test methods▷ISO 7439:2023 Copper-bearing contraceptive intrauterine devices — Requirements and tests▷ISO 8009:2014 Mechanical contraceptives — Reusable natural and silicone rubber contraceptive diaphragms — Requirements and tests▷ISO 11249:2018 Copper-bearing intrauterine contraceptive devices — Guidance on the design, execution, analysis and interpretation of clinical studies▷ISO 16037:2002 Rubber condoms for clinical trials — Measurement of physical properties▷ISO 16037:2002/Amd 1:2011 Rubber condoms for clinical trials — Measurement of physical properties — Amendment 1▷ISO 16038:2017 Male condoms — Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms▷ISO 19351:2019 Fallopian rings — Requirements and test methods▷ISO 19671:2018 Additional lubricants for male natural rubber latex condoms — Effect on condom strength▷ISO/TR 19969:2018 Guidance on sample handling for determination of bursting volume and pressure, and testing for freedom from holes for male condom▷ISO 23409:2011 Male condoms — Requirements and test methods for condoms made from synthetic materials▷ISO/TR 24484:2023 Female condoms — Use of ISO 25841 and the quality management of female condoms▷ISO 25841:2017 Female condoms — Requirements and test methods▷ISO 25841:2017/Amd 1:2020 Female condoms — Requirements and test methods — Amendment 1▷ISO 29941:2010 Condoms — Determination of nitrosamines migrating from natural rubber latex condoms □ ISO/TC 157 사무국의 직접적인 책임 하에 개발 중인 표준 2개 목록▷ISO/CD 4074 Natural rubber latex male condoms — Requirements and test methods▷ISO/TS 23148 Compatibility of lubricants with synthetic male condoms
-
[특집-기술위원회] TC 142 - 공기 및 기타 가스 청소 장비(Cleaning equipment for air and other gases)스위스 제네바에 본부를 두고 있는 국제표준화기구(ISO)에서 활동 중인 기술위원회(Technical Committeee, TC)는 TC 1~TC 323까지 구성돼 있다. 기술위원회의 역할은 기술관리부가 승인한 작업범위 내 작업 프로그램 입안, 실행, 국제규격의 작성 등이다. 또한 산하 분과위원회(SC), 작업그룹(WG)을 통해 기타 ISO 기술위원회 또는 국제기관과 연계한다.ISO/IEC 기술작업 지침서 및 기술관리부 결정사항에 따른 ISO 국제규격안 작성·배포, 회원국의 의견 편집 등도 처리한다. 소속 분과위원회 및 작업그룹의 업무조정, 해당 기술위원회의 회의 준비도 담당한다.1947년 최초로 구성된 나사산에 대한 TC 1 기술위원회를 시작으로 순환경제를 표준화하기 위한 TC 323까지 각 TC 기술위원회의 의장, ISO 회원, 발행 표준 및 개발 표준 등에 대해 살펴볼 예정이다.이미 다룬 기술위원회와 구성 연도를 살펴 보면 △1947년 TC 1~TC 67 △1948년 TC 69 △1949년 TC 70~72 △1972년 TC 68 △1950년 TC 74 △1951년 TC 76 △1952년 TC 77 △1953년 TC 79, TC 81 △1955년 TC 82, TC 83 △1956년 TC 84, TC 85 △1957년 TC 86, TC 87, TC 89 △1958년 TC 91, TC 92 등이다.△1959년 TC 94 △1960년 TC 96, TC 98 △1961년 TC 101, TC 102, TC 104, △1962년 TC 105~TC 107, △1963년 TC 108~TC 111, △1964년 TC 112~TC 115, TC 117, △1965년 TC 118, △1966년 TC 119~TC 122, △1967년 TC 123, △1968년 TC 126, TC 127, △1969년 TC 130~136 등도 포함된다.ISO/TC 142 공기 및 기타 가스 청소 장비(Cleaning equipment for air and other gases) 관련된 기술위원회는 TC 137, TC 138과 마찬가지로 1970년 결성됐다. 사무국은 이탈리아 표준화기구(Ente Italiano di Normazione, UNI)에서 맡고 있다.위원회는 안나 마르티노(Mrs Anna Martino)가 책임지고 있다. 현재 의장은 리카르도 로마노(Mr Riccardo Romanò)으로 임기는 2025년까지다.ISO 기술 프로그램 관리자는 블란딘 가르시아(Mme Blandine Garcia), ISO 편집 관리자는 앤 기엣(Ms Anne Guiet) 등으로 조사됐다.범위는 일반 환기 및 산업용 응용 분야의 공기 및 가스 청소, 소독 장비에 대한 용어, 분류, 특성, 테스트 및 성능 방법 분야의 표준화다.단, 다른 ISO 기술 위원회의 범위 내에 있는 모바일 장비의 가스 터빈 및 IC 엔진용 배기 가스 세정기는 제외한다. 또한 기술 위원회 ISO/TC 94 업무 분야인 개인 보호 장비용 필터, ISO/TC 22, 23 및 127이 적용되는 모바일 장비의 캐빈 필터 등도 표준화 범위에서 제외된다.현재 ISO/TC 142 사무국의 직접적인 책임 하에 발행된 표준은 27개며 ISO/TC 142 사무국의 직접적인 책임 하에 개발 중인 표준은 22개다. 참여하고 있는 회원은 23개국, 참관 회원은 20개국이다.□ ISO/TC 142 사무국의 직접적인 책임 하에 발행된 표준 27개 중 15개 목록▷ISO 10121-1:2014 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 1: Gas-phase air cleaning media▷ISO 10121-2:2013 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 2: Gas-phase air cleaning devices (GPACD)▷ISO 10121-3:2022 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 3: Classification system for GPACDs applied to treatment of outdoor air▷ISO 15714:2019 Method of evaluating the UV dose to airborne microorganisms transiting in-duct ultraviolet germicidal irradiation devices▷ISO 15727:2020 UV-C devices — Measurement of the output of a UV-C lamp▷ISO 15858:2016 UV-C Devices — Safety information — Permissible human exposure▷ISO 15957:2015 Test dusts for evaluating air cleaning equipment▷ISO 16170:2016 In situ test methods for high efficiency filter systems in industrial facilities▷ISO 16890-1:2016 Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM)▷ISO 16890-2:2022 Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance▷ISO 16890-3:2016 Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured▷ISO 16890-4:2022 Air filters for general ventilation — Part 4: Conditioning method to determine the minimum fractional test efficiency▷ISO 16891:2016 Test methods for evaluating degradation of characteristics of cleanable filter media▷ISO 21083-1:2018 Test method to measure the efficiency of air filtration media against spherical nanomaterials — Part 1: Size range from 20 nm to 500 nm▷ISO/TS 21083-2:2019 Test method to measure the efficiency of air filtration media against spherical nanomaterials — Part 2: Size range from 3 nm to 30 nm□ ISO/TC 114 사무국의 직접적인 책임 하에 개발 중인 표준 22개 중 15개 목록▷ISO/CD 5371 High efficiency filtration units in exhaust ventilation system of biosafety facilities▷ISO/AWI 10121-1 Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 1: Gas-phase air cleaning media▷ISO/AWI 10121-2 Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 2: Gas-phase air cleaning devices (GPACD)▷ISO/CD 15858 UV-C Devices — Safety information — Permissible human exposure▷ISO/AWI 15957 Test dusts for evaluating air cleaning equipment▷ISO/DIS 16313-1 Laboratory test of dust collection systems utilizing porous filter media online cleaned using pulses of compressed gas — Part 1: Systems utilizing integrated fans▷ISO/AWI 16890-1 Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM)▷ISO/DIS 16890-3 Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured▷ISO/AWI 17597 Test Method for Measuring in-duct AirborneMicroorganisms Inactivation Effectiveness (AMIE)▷ISO/FDIS 23137-1 Requirements for aerosol filters used in nuclear facilities against specified severe conditions — Part 1: General requirements▷ISO/DIS 23138 Biological equipment for treating air and other gases — Principles and classification▷ISO/DIS 23742 Test method for the evaluation of permeability and filtration efficiency distribution of bag filter medium▷ISO/FDIS 29461-3 Air intake filter systems for rotary machinery — Test methods — Part 3: Mechanical integrity of filter elements▷ISO/CD 29461-4 Air intake filter systems for rotary machinery — Part 4: Test methods for static filter systems in coastal and offshore environments▷ISO/DIS 29463-1 High efficiency filters and filter media for removing particles from air — Part 1: Classification, performance, testing and marking
-
[미국] 특허법, 명세서의 내용으로부터 청구범위의 내용 제한시 “a clear and unmistakable disclaimer” 원칙 준수미국 특허법에 따르면 명세서의 내용으로부터 청구범위의 내용을 제한할 경우에 “a clear and unmistakable disclaimer” 원칙을 준수해야 한다.특허권의 권리는 발명을 서술한 명세서에 작성된 청구항을 통해 확보할 수 있다. 이에 따라 서술된 청구항의 해석에 따라 권리범위가 적용될 수 있는 범위가 달라질수 있으므로 이에 대한 이해는 매우 중요하다. 예를 들면 특허 명세서에 개시된 발명의 서면 설명에 비춰 특허의 청구를 해석해야 하는지 여부 또는 미국 항소 법원이 우선 청구조건의 일반적인 의미를 결정해야 하는지 여부도 중요한 하나의 요소가 될 수 있다.이에 대한 실례로서 컨티넨털서킷(Continental Circuits)과 인텔(Intel)간의 소송을 소개한다. 이 판례에서는 특허권자가 주장 범위를 명확하고 명백하게 반박하지 않았다.그 과정이 청구된 발명의 필수 부분이라는 것을 명확하게 하지 않은 경우, 제품 청구를 제한적으로 해석하는 것은 부적절하다는 점을 보여준다.국문요약: 본 판례는 청구항에 언급된 “surface”, “removal”, “etching”, “dielectric material’의 용어가 명세서에 언급된 “repeated desmear process”용어에 의해 한정되는지 여부에 관한 것이다.연방 순회 항소 법원에서는 비록 명세서에 “repeated desmear process”용어가 사용됐지만 청구항에서는 이에 대한 용어가 직접 사용되지 않고 있다는 점을 언급하면서 지방법원의 잘못을 지적했다.또한 명세서의 내용으로부터 청구범위의 내용을 제한할 때에는 반드시 “a clear and unmistakable disclaimer” 원칙을 준수해야 한다는 점을 언급했다.영문요약: Incorporating Limitation from Specification(Issue of Claim Construction)Continental Circuits v. Intel (F.C. 2019)History: •Continental asserted four patents directed to a “multilayer electrical device … having a tooth structure” against Intel.•Claims included the limitations regarding “surface,” “removal,” “etching,” and “dielectric material.”•Issue: whether the claim construction of these terms should be limited to a repeated desmear process.District Court:•Interpreted the limitations to require repeated process.•Determined that the Continental characterized “The present invention” as using a repeated desmear process.•Specification also seems to distinguish the invention from the single desmear process in the prior art.Federal Circuit:•Held that district court erred in costruing the terms to require that the dielectric material be “produced by a repeated desmear process.”•The plain claim language does not include this repeated process and the specification does not unmistakably limit the claims to require this process.•Although the claims do not stand alone and must be read in view of the specification, FC held that none of the asserted claims actually recite a “repeated desmear process.”•Specification may include an intentional disclaimer, or disavowal, of claim scope, but it is not the case here.•FC acknowledged difficulty in determining between whether to construe the claims in light of the specification or improperly importing a limitation from the specification into the claims.•Must follow “a clear and unmistakable disclaimer” standard when importing limitations from specification to the claims.